Siemens X-Ray Equipment Servicer's Technical Forum

Siemens Lithostar/Lithoskop/Urology (SP) => Service Software/Keys/Documents => Topic started by: Dalibor on October 03, 2016, 11:19:21 AM



Title: Uroskop acces - need calibration software
Post by: Dalibor on October 03, 2016, 11:19:21 AM
Hello,

I need calibrate Uroskop Acces with generator Polydoros LX.
On startup screen is Uroskop Acces VA14A Build 05 P05 (syngo VX43A SL01P08).

Siemens Optitop 150/40/80HC-100 (model n.3345209), Tube Optitop 150/40/80HC (model n. 3345233).

Can I use spc_find (xcs_find) for find out what software version is installed.

Thank for advice



Title: Re: Uroskop acces - need calibration software
Post by: vesper on October 04, 2016, 02:53:47 AM
What do you need to calibrate exactly?

You can use spc_find to find out the firmware version loaded to the XCU.


Title: Re: Uroskop acces - need calibration software
Post by: Dalibor on October 05, 2016, 04:09:09 AM
My colleauge told me, he changed boards D2 and D3, and now uroskop  displayed a poor image. We want to try calibrate camera or image processing ... if is it possible.